Ethernet Parameters

The Ethernet parameters are described in the table below.

Ethernet Parameters

Parameter	Description
configure voip > media settings > arp-manager-timeout [ArpManagerTimeout]	Defines the maximum duration or timeout (in seconds) that the device waits for an Address Resolution Protocol (ARP) reply. If no reply is received within this duration, the device terminates the call. The valid value is 1 to 20. The default is 3. Note: The device first checks its internal ARP table for a MAC address that matches the destination IP address. It only sends an ARP request if no match is found.

Parameter

Description

configure voip > media settings > arp-manager-timeout

[ArpManagerTimeout]

Defines the maximum duration or timeout (in seconds) that the device waits for an Address Resolution Protocol (ARP) reply. If no reply is received within this duration, the device terminates the call.

The valid value is 1 to 20. The default is 3.

Note: The device first checks its internal ARP table for a MAC address that matches the destination IP address. It only sends an ARP request if no match is found.